Dead Pixel Test
Fill your screen with solid colours, one at a time, to find dead, stuck and hot pixels on a monitor, laptop, TV or phone. It changes only when you tell it to.
Photosensitivity warning. This test fills the screen with bright, solid colours. It only changes when you press a key or tap, unless you turn on auto-advance — and then never faster than once every two seconds. If you are sensitive to flashing light, keep auto-advance off and step through slowly.
Start on a colour
Each colour shows a different fault. Tap one to start there; the test then steps through the rest.
In the test: → or Space for the next colour, ← to go back, H to show or hide the tips, and Esc to finish. On a touchscreen, tap for the next colour; the controls come back after the last one.
Table of contents
How to test a screen for dead pixels
- 1
Clean the screen first
A speck of dust looks exactly like a dead pixel. Wipe the screen with a dry microfibre cloth, and dim the room if you can — faults are easier to see without reflections.
- 2
Start the full-screen test
Press Start, or pick the colour to begin on. The page asks the browser for full screen so nothing but the colour is on the display; on iPhone, where pages cannot go full screen, it fills the window.
- 3
Step through every colour
Press the right arrow or Space, or tap, to move on. On each colour, look across the whole screen slowly, section by section, from a normal viewing distance and then close up. The tips say what to look for on each one.
- 4
Note anything that does not change
A dot that stays black on every colour is dead; one that stays lit on black is stuck. Note where it is, then press Esc to finish. Take a photo of it on the colour where it shows best if you are going to report it.
Dead, stuck and hot pixels
Every pixel on a colour screen is three smaller lights — red, green and blue sub-pixels — each switched by its own tiny transistor. The colour you see is how brightly each of the three is lit. A fault is one of those switches failing, and which way it fails decides what you see and which test screen shows it.
A dead pixel is one whose sub-pixels are all permanently off. On most modern LCD and OLED screens it is a black dot, invisible on the black screen and obvious on white. A stuck pixel has one or two sub-pixels permanently on, so it glows red, green, blue, or a mix such as yellow or cyan, and stands out most on black. A hot pixel is the name usually given to one stuck fully on, a white dot on black.
The red, green and blue screens catch the subtler case: a pixel with one sub-pixel failed off looks almost normal on white but shows as a dark spot on the screen of that colour. The grey screen shows bright and dark faults together and makes uneven backlighting, clouding and “dirty screen” patches easier to see than either black or white.
Not everything that looks like a pixel fault is one. Dust on the surface moves when you wipe it. A mark that is larger than a pixel and fuzzy at the edges is usually pressure damage or something between the layers of the panel. A pattern that appears only with certain images is more likely burn-in on an OLED, or image retention on an LCD, both of which this test also makes visible on the grey screen.
Why this test never flashes
Rapidly alternating saturated colours across a whole screen can trigger seizures in people with photosensitive epilepsy, and many do not know they have it until it happens. Web accessibility guidelines treat anything flashing more than three times a second as dangerous. So this test changes only when you press a key or tap, auto-advance is off unless you choose it, and even then the fastest choice is one change every two seconds.
That rules out the “pixel fixer” feature many dead pixel sites offer, and we have left it out deliberately rather than by omission. Those tools flash red, green and blue many times a second over the faulty area, on the theory that it unsticks the pixel. There is no controlled evidence that it works; stuck pixels sometimes recover on their own, which makes anecdotes impossible to judge. A remedy that may do nothing and can cause a seizure is not one we will put on a page.
If a new screen has a fault you can see in normal use, the reliable fix is the shop’s return policy or the manufacturer’s warranty. Check the model’s pixel policy, and photograph the fault on the colour where it shows most clearly.
Frequently asked questions
A dead pixel gets no power, so it stays off — on most modern screens that is a black dot, easiest to see on the white screen. A stuck pixel has one or more of its red, green and blue sub-pixels permanently on, so it shows as a bright coloured dot, easiest to see on black. A pixel can also be partly stuck, with one sub-pixel failed off, which shows as a dark dot on that colour only.
Sometimes a stuck pixel recovers on its own after hours or days of use, and very occasionally after the screen is switched off for a while. A dead pixel does not come back. Beyond that, there is no reliable fix that a web page or video can give you, and some popular ones carry real risks — see below.
There is no good evidence that they do. They rapidly flash colours over the faulty area in the hope of jolting the pixel back to life; reports of success are anecdotal and cannot be told apart from pixels that would have recovered anyway. They are also exactly the kind of rapid full-screen flashing that can trigger seizures in people with photosensitive epilepsy, which is why this test never flashes and its optional auto-advance changes no faster than once every two seconds.
Not recommended. Massaging the screen through a cloth is a well-known suggestion, and pressing on an LCD or OLED panel is also a good way to damage it further, and may not be covered by the warranty if it does. If the screen is new, return or warranty it instead.
It depends entirely on the manufacturer. Many publish a pixel policy, often based on the pixel-fault classes of the ISO 9241-307 standard, which allows a small number of faults per million pixels; some premium lines promise zero bright pixels. Look up your model's policy, and test a new screen straight away — the shop's return window is usually easier than a warranty claim.
Yes, on anything with a browser. On Android, full screen works as on a computer. iPhone Safari cannot put a page into full screen, so the test fills the window; turn the phone sideways and scroll slightly to hide the bars. On a smart TV, open this page in its browser and use the remote's arrow keys.
A smooth ramp from black to white shows a different kind of fault: banding, where the screen shows visible steps instead of a smooth blend. A little banding is normal on cheaper panels and with some colour settings; heavy banding can mean the display is running at a reduced colour depth.
The Zeal Promise
Non-negotiable, on every tool we ship.
- No sign-up — ever
- No watermarks on any output
- No ads near the download button
- Works fully on mobile
- Privacy-first: processing stays in your browser
- Open source (MIT) — audit it, contribute, self-host
- Zero runtime dependencies in tool logic