Keyboard Tester
Press any key and watch it light up on a full-size layout — with the key code, how many keys you can hold at once, and a flag for keys that register twice.
Click the keyboard or tab to it, then press keys. Esc leaves it again. Nothing you type is stored or sent.
- Held now
- Worked
- Chatter detected
- Not pressed yet
Last key
- key
- —
- code
- —
- location
- —
- repeat
- —
Rollover
0 held · max 0
Hold several keys at once
Chatter
None detected
A key that registers twice within 30 ms is flagged here.
Coverage
0 / 104 keys
0 presses · 0 auto-repeats
How to test a keyboard online
- 1
Focus the test area
Click the drawing of the keyboard, press Start typing, or Tab to it. A solid border means it is listening. Keys only count while it has focus, so nothing you type elsewhere on the page is read.
- 2
Press every key
Each key turns solid while it is held and stays tinted once it has worked, so a key that never lights up is the one to worry about. The coverage count tells you how many of the drawn keys you have reached.
- 3
Hold several at once
Press and hold as many keys as you can — or the combination you use in a game. The rollover box shows how many are held now and the most you reached. If a key you are holding does not light, the keyboard blocked it.
- 4
Press Esc to finish
Escape hands focus back to the page, so Tab works normally again. Reset clears the results for another run.
Reading the results
Last key shows the four things the browser reports for every press. key is the character or name your layout produced; code is the physical position; location tells the left Shift from the right one and the numpad Enter from the main one; and repeat says whether this was the key auto-repeating because you held it down. Auto-repeats are counted separately and never treated as new presses.
Rollover is the number of keys held right now and the most you have held at once. It is the honest way to check a keyboard’s anti-ghosting claim: hold W, A, S and D, add Shift and Space, and see whether every one lights. A keyboard that stops at six on one combination may manage more on another, because the limit depends on how the keys are wired, so test the combinations you actually use.
Chatter lists keys that registered twice within 30 milliseconds. One flag after hundreds of presses can be a fluke; a key that flags again and again has a switch that needs cleaning or replacing. Type a word with the suspect letter in it a dozen times and watch the count.
Coverage counts how many of the drawn keys have worked at least once. Keys your keyboard has that the drawing does not — media keys, F13 and above, Japanese and Korean input keys — are listed by code underneath instead of being silently ignored. If your board is a UK or European one, switch the layout to ISO; pressing the extra key beside left Shift switches it for you.
When a key does not work
Rule out the software first. On Windows, Filter Keys (Settings → Accessibility → Keyboard) ignores brief or repeated presses and can make a working key look dead; turn it off while testing. Gaming keyboards with a “game mode” often disable the Windows key on purpose. Some laptops swap the function row for media keys, often toggled by Fn+Esc or a setting in the manufacturer’s app.
On a Mac, ⌘ swallows key releases. While ⌘ is held, macOS does not tell the browser when other keys are let go. The tester knows this and clears those keys when ⌘ is released, so a combination with ⌘ in it will show correctly once you let go of ⌘ last. On Windows, Print Screen is usually taken by the screenshot tool, so only its release reaches the page; it still counts.
Then the connection. Try another USB port, plugging in directly rather than through a hub, or a fresh battery for a wireless keyboard. A Bluetooth keyboard that drops presses when held near a USB 3 port or a Wi-Fi router is suffering interference, not a fault. If a whole row or column of keys fails together, the problem is the keyboard’s circuit rather than individual switches.
Then the switch. A single key that is dead, sticky or chattering on a mechanical keyboard is very often dust or a spill. Remove the keycap, blow the switch out and press it twenty or thirty times. Hot-swappable boards let you replace the switch outright; on a laptop, the keyboard is usually one part and the fix is the manufacturer’s.
Frequently asked questions
code names the physical key — the one in the position of Q on a US keyboard is KeyQ on every keyboard, including a French one where it prints A. key is what your operating system's layout made of it: a, A, é or Shift. A hardware test cares about code, which is why the drawing is keyed by it; key is shown beside it so you can check your layout setting too.
How many keys a keyboard can report at once. Cheaper keyboards share wires between keys, so certain combinations of three or four cannot all be read. Many USB keyboards report up to six ordinary keys plus the modifiers, which is the limit of the basic USB keyboard protocol; gaming keyboards advertising n-key rollover report every key. Hold keys down one at a time and watch the count: where it stops rising is your keyboard's limit for that combination.
On a keyboard wired as a grid, pressing three keys at the corners of a rectangle can make the fourth corner look pressed too — a ghost key you never touched. Most keyboards now prevent that by blocking the third or fourth key instead, which is what you will usually see here: you hold a key and it simply does not light. Both mean that combination is beyond the keyboard's matrix.
A key that registers two presses for one. Mechanical switches bounce for a few milliseconds when they close, and the keyboard is supposed to filter that out; a worn, dirty or faulty switch can bounce for longer than the filter allows, so one press types two letters. This tester flags any key that registers twice within 30 ms, which is faster than anyone can deliberately press a key twice.
Fn is handled inside the keyboard itself and never sent to the computer, so no web page or program can see it. Test it by what it changes: hold Fn and press a function key, and you should see a different code arrive — a media key, for instance, or F1 instead of a brightness key.
The browser and the operating system keep some combinations for themselves before a page sees them: Ctrl or ⌘ with W, T, N or Q, Alt+Tab, the Windows key, Ctrl+Alt+Delete. A page cannot stop those, and it should not be able to. Test those keys on their own instead.
No. The page keeps counts — which keys have been pressed and how often — and the last key's details for the readout. There is no text box and nothing is stored or sent. Reload the page and it is all gone.
The Zeal Promise
Non-negotiable, on every tool we ship.
- No sign-up — ever
- No watermarks on any output
- No ads near the download button
- Works fully on mobile
- Privacy-first: processing stays in your browser
- Open source (MIT) — audit it, contribute, self-host
- Zero runtime dependencies in tool logic