What Is My IP
Your public IP address, whether it is IPv4 or IPv6, and everything a website can work out from it — shown back to you and never stored.
Reading your IP address…
Your public IP address
Every website you open sees this address — it is where the reply has to be sent. This page reads it from your request to zeal.tools and shows it back to you. Nothing is stored or logged.
Where websites think you are
The city your provider's addresses are registered to — usually right about the country, often right about the city, never your street. The map is drawn on this page; no map service is asked.
Local time there
Guessed from the location, not read from your device.
Provider
The organisation that holds this block of addresses, and its network number.
Connection
How your browser talked to this page, and the Cloudflare site (an airport code) that answered.
Location comes from Cloudflare's IP geolocation. On a VPN, everything above describes the VPN's server, not you.
Table of contents
How to find your IP address
- 1
Open the page
Your address appears at the top as soon as the page loads — there is nothing to type or press. The badge beside it says whether your browser connected over IPv4 or IPv6.
- 2
Copy it if you need it
Press Copy IP address to put it on your clipboard, ready to paste into a firewall allow-list, a support ticket or a game server's settings.
- 3
Read what it reveals
Below the address is everything a website can work out from it alone: roughly where you are, your time zone, and which provider the address belongs to. Each line says how far to trust it.
- 4
Check again after a change
Switched a VPN on, moved from Wi-Fi to mobile data, or restarted your router? Press Check again to see the address the internet sees now.
Every website sees your IP address — that is how the internet works
An IP address is the return address on every packet your device sends. When you open a page, your browser sends a request to the site's server, and the server needs to know where to send the page back. There is no way to receive a reply without giving one — so every site you have ever opened has seen your address, whether or not it bothered to show you.
This page simply shows it back. Your browser asks zeal.tools for the address the request arrived from, and Cloudflare, which runs our servers, has already worked out the rest by the time the request reaches us: the approximate location, the network it came from and how the connection was set up. We read those details off the request, send them back to you, and keep nothing. There is no database to put them in.
Most people have two addresses that matter. Your device has a local address, handed out by your router and meaningful only inside your home or office. Your router has a public address, given to it by your internet provider, and it rewrites every outgoing request to come from that one. The public address is the one on this page, which is why every device on the same Wi-Fi shows the same answer here.
IPv4 and IPv6, and why a site sees only one
IPv4 addresses are four numbers from 0 to 255 separated by dots, such as 203.0.113.7. There are about 4.3 billion of them, which ran out years ago — that shortage is why your whole household shares one, and why many mobile networks now share one address between many customers.
IPv6 addresses are eight groups of hexadecimal digits separated by colons, such as 2001:db8::1, where the double colon stands for a run of zeros. There are enough of them for every device to have its own, so there is no sharing: each phone and laptop gets a globally unique address, and most rotate a temporary one regularly so they are harder to track.
Many connections have both, but each request travels over only one, so a website only ever sees one of your addresses. Browsers prefer IPv6 when your provider and the site both support it, and quietly fall back to IPv4 when the IPv6 route is slow. This page reports whichever your browser chose, and shows it in the standard short form — leading zeros dropped and the longest run of zero groups shortened — so the same address always looks the same.
Why the location is only approximate
Nothing in an IP address says where it is. The location comes from a geolocation database, which maps blocks of addresses to the place they are registered to or were last seen being used. It is compiled from registry records, provider data and measurements, and it is an estimate of the block, not of you.
In practice the country is right almost every time, the region usually, and the city often but far from always. Mobile networks are the worst case: a whole region's traffic often leaves through one city, so a phone in a village can appear to be a hundred miles away. The coordinates are the centre of the estimated area, shown to two decimal places because anything finer would claim a precision the data does not have. The postcode, where one appears, is usually only the first part.
The time zone is inferred from that same location — it is not read from your device's clock — and the provider and network number come from the public records of who holds each block of addresses. None of it needs your permission, which is exactly why it is worth knowing what it says.
On a VPN, a proxy or Tor
A VPN, a privacy relay or a proxy carries your traffic to its own server before it goes anywhere else, so websites see the server's address and not yours. That is the point of one, and this page is a quick way to check it is working: with it switched on, the address, location and provider should all describe the VPN's server. If your own provider's name still appears, something is leaking.
Corporate networks and some mobile providers do the same thing whether you ask or not, so an office laptop may show the company's address in another city. Cloudflare marks traffic leaving the Tor network, and this page shows it as the Tor network rather than pretending it belongs to a country.
Frequently asked questions
It is the address shown at the top of this page: the public address your connection arrives from. It usually belongs to your router or your mobile network rather than to the device in your hand, so every phone and laptop on the same home Wi-Fi normally shows the same one.
Usually not. Your device's settings show its local address — something like 192.168.1.23 — which only means anything inside your own network. Your router swaps that for its single public address on the way out, a step called network address translation. The public one is what websites see, and it is the one shown here.
No. The page asks our server one question — what address did this request come from — and the answer is sent straight back and marked as not to be cached. It is not written to a database, a log or our analytics events.
Because it is an estimate of where your provider's block of addresses is registered, not a measurement of you. Mobile networks often route a whole region through one city, and some providers register everything at their head office. Country is right nearly always, city often, and the street never — which is the reason nothing on this page can give your home away.
When your provider and the site both support IPv6, browsers prefer it, and a site only ever sees the one address the connection used. You almost certainly have an IPv4 address too; it is simply not the one your browser chose for this page. Turning IPv6 off on your device or router will show the IPv4 one, though it is rarely worth doing.
Most home addresses are dynamic: your provider can hand out a new one when the router restarts or after a lease expires, which may be days or months. IPv6 devices also rotate a temporary address every day or so for privacy. Mobile data changes it most often of all. A fixed, static address is usually something a business pays for.
Not from the address alone. Anyone can see roughly the area and the provider, as this page shows. Linking an address to a named customer takes the provider's own records, which they hand over to police with a legal order, not to the public. What an address is good for is blocking, rate-limiting and spotting a login from somewhere unusual.
Use a VPN, a privacy relay such as iCloud Private Relay, or the Tor Browser. Each sends your traffic through someone else's server, so websites see that server's address instead of yours. You are then trusting that service with what your provider could see before. Open this page with it switched on to check it is working.
An ASN — autonomous system number — identifies one network on the internet, such as a broadband provider or a cloud company, and the provider name next to it is who holds it. The data centre is the airport code of the Cloudflare location that answered your request, which is usually the one nearest to you, network-wise.
API — for scripts and agents
The page reads your address from a free REST endpoint, and you can call it too. No API key, no sign-up. It returns JSON with the address, its version and the same details as above, any of which may be null when the request did not carry them.
curl https://zeal.tools/api/v1/ip
# just the address, for a script
curl 'https://zeal.tools/api/v1/ip?format=text'Open /api/v1/ip in a browser to see your own response. The answer is always about whoever made the request, so it reports the address of the machine that runs the command — which is also why there is no MCP tool for this: called through an AI assistant, it would describe the assistant's server, not you.
The Zeal Promise
Non-negotiable, on every tool we ship.
- No sign-up — ever
- No watermarks on any output
- No ads near the download button
- Works fully on mobile
- Privacy-first: processing stays in your browser
- Open source (MIT) — audit it, contribute, self-host
- Zero runtime dependencies in tool logic