Webcam Test
See your camera live, with the resolution and frame rate it really delivers, and save a full-size snapshot. Nothing is recorded or uploaded.
See your camera, and what it really delivers
Your browser will ask for permission. The picture stays on this page and nothing is recorded or sent.
The list fills in once access is allowed — browsers hide device names until then.
A request, not a guarantee: the camera opens at the nearest size it supports, shown above.
Table of contents
How to test a webcam online
- 1
Press Start and allow the camera
The browser asks only when you press the button. The preview appears mirrored, the way a selfie camera and most video-call apps show you to yourself.
- 2
Read what the camera delivers
Resolution, aspect ratio and frame rate come from the camera stream itself, and the measured frame rate counts the frames that actually arrive. Compare them with what the box or the spec sheet promised.
- 3
Ask for more, or switch camera
Choose 1080p or 4K to ask the camera for a larger picture; it opens at the nearest size it can manage, which may be lower. Once access is allowed the camera list shows real device names, including phone rear cameras.
- 4
Take a snapshot
Save snapshot writes the current frame as a PNG, at full resolution and unmirrored, straight to your downloads. It is a quick way to check focus, colour and exposure at the pixel level.
What the readouts mean
Resolution is the size of the frames the page is actually receiving, read from the video itself rather than from the request. That distinction is the whole point: a page asks a camera for a size, and the camera answers with the nearest one it can do. Many “1080p” webcams deliver 1080p only at a low frame rate, or only in a compressed mode the browser may not pick.
Frame rate appears twice. The reported figure is what the stream is configured for; the measured figure is a count of frames that arrived over the last second. Expect 30 in good light. A measured figure that falls to 15 when you turn the room light off is the camera lengthening its exposure, which is normal behaviour rather than a fault.
Aspect ratio is usually 16:9 for modern webcams and 4:3 for older ones and some phones. If your picture looks stretched in a call app but correct here, the app is the one changing it.
Capabilities list what the camera says it supports, from frame size and rate ranges to zoom, focus and exposure controls. Not every browser shares them with pages; when yours does not, the delivered settings above are still accurate.
When the camera will not start
“Could not be opened” almost always means another app has it. Windows lets one program use a camera at a time, so Teams, Zoom, OBS, the Camera app or another browser holding it will stop this page. Close them — check the system tray for apps that keep running in the background — and press Start again.
If access was blocked, allow it from the icon at the left of the address bar in Chrome and Edge, the crossed-out camera in Firefox, or Safari → Settings → Websites → Camera. Then check the operating system: Windows Settings → Privacy & security → Camera, including “Let desktop apps access your camera”; on a Mac, System Settings → Privacy & Security → Camera, with your browser switched on. Restart the browser after changing a macOS permission.
If the picture is black, look for a physical privacy shutter over the lens, or a camera key on the keyboard — several laptops cut the camera in hardware with a key or a switch on the side, and no setting overrides it. On Windows, Device Manager shows whether the camera is detected at all; if it is missing there, it is a driver or hardware problem rather than the browser.
If the wrong camera opens, pick the right one from the list here, which fills in once access is allowed. Virtual cameras from OBS or video-call apps appear in the list too and show a still image or nothing when their app is closed.
Frequently asked questions
Because the browser opens a camera at a modest default size unless a page asks for more. Choose 1080p in the Ask for list and the camera reopens at the nearest size it supports. If it still comes back small, the camera may be connected through a slow USB port or hub, another app may already have it open at a lower size, or the camera simply does not do what the box claims at a usable frame rate.
Light, most often. In a dim room many webcams slow down to keep each frame exposed for longer, so the picture is brighter but less smooth. Turn on a light in front of you and watch the measured figure climb. Long USB extension cables, busy hubs and the camera running at a high resolution over USB 2 can also cap it.
The reported figure is what the camera stream says it is set to. The measured figure counts the frames that actually reach the page each second. When they disagree, the measured one is what people on a call see. Measuring needs a browser feature called requestVideoFrameCallback, which most current browsers have; where it is missing, the readout says so rather than guessing.
No. Video-call apps show you a mirrored preview because that is what a mirror looks like, but send the unmirrored picture, so text on your T-shirt reads the right way round for everyone else. Turn mirroring off here to see what they see. The snapshot is always saved unmirrored.
No. The picture is drawn on this page by your browser and nothing is recorded. A snapshot is made from the current frame on your own device and handed to your downloads folder; it never passes through zeal.tools. The camera is turned off when you press Stop, leave the page or switch away from the tab.
They are the ranges the camera tells the browser it supports: the largest and smallest frame sizes, frame rates, and controls such as zoom, focus, exposure and white balance where it offers them. They describe the hardware's limits, not what is in use; the readouts at the top are what is in use.
The Zeal Promise
Non-negotiable, on every tool we ship.
- No sign-up — ever
- No watermarks on any output
- No ads near the download button
- Works fully on mobile
- Privacy-first: processing stays in your browser
- Open source (MIT) — audit it, contribute, self-host
- Zero runtime dependencies in tool logic